I am stuck on having to use SUSE Ent Linux Server 11 SP 3 for the support of the Emulex fibre channel card
I would like to: mount.exfat-fuse /dev/sdx2 /mnt/exFAT/
If ‘mount.exfat-fuse’ is not a typo you can run the following command to lookup the package that contains the binary:
command-not-found mount.exfat-fuse
-bash: mount.exfat-fuse: command not found
gnome-mount is installed… but
"
gnome-mount --write-settings --device /dev/sdx2 --mount-point /mnt/exFAT/
Writing settings for volume
hal udi: /org/freedesktop/Hal/devices/volume_uuid_1234_4321
"
gave no error or mounted stuff
Hi
Subversion, scons etc are on the SLE 11 SP3 SDK either download and add
the iso image (via YaST add on products), or check your SCC page for the
URL’s and mirror credentials to add.
The gparted package is not part of SLE, you would need to look at
building locally. Use parted or YaST partitioner instead?
–
Cheers Malcolm °¿° LFCS, SUSE Knowledge Partner (Linux Counter #276890)
SUSE Linux Enterprise Desktop 12 GNOME 3.10.1 Kernel 3.12.39-47-default
If you find this post helpful and are logged into the web interface,
please show your appreciation and click on the star below… Thanks!
[QUOTE=malcolmlewis;27488]Hi
Subversion, scons etc are on the SLE 11 SP3 SDK either download and add
the iso image (via YaST add on products), or check your SCC page for the
URL’s and mirror credentials to add.
The gparted package is not part of SLE, you would need to look at
building locally. Use parted or YaST partitioner instead?
–
Cheers Malcolm °¿° LFCS, SUSE Knowledge Partner (Linux Counter #276890)
SUSE Linux Enterprise Desktop 12 GNOME 3.10.1 Kernel 3.12.39-47-default
If you find this post helpful and are logged into the web interface,
please show your appreciation and click on the star below… Thanks![/QUOTE]
There is always a great answer for a stupid question:
" YaST partitioner" - this was just what I was looking for. THANKS How did I miss that? shame. Could it be the update that installed it? I doubt that.
But no, it does not see the partition as exfat - Linux native. I will check if it is and maybe NFS mount from that other OS.
–
Cheers Malcolm °¿° LFCS, SUSE Knowledge Partner (Linux Counter #276890)
SUSE Linux Enterprise Desktop 12 GNOME 3.10.1 Kernel 3.12.39-47-default
If you find this post helpful and are logged into the web interface,
please show your appreciation and click on the star below… Thanks!
Hi Malcolm
Is that the better way…
I did today -
rpm -Uvh /home/user/Downloads/glibc-devel-2.14.1-14.27.1.x86_64.rpm /home/user/Downloads/glibc-locale-2.14.1-14.27.1.x86_64.rpm /home/user/Downloads/glibc-2.14.1-14.27.1.x86_64.rpm
And then rpm -Uvh /home/user/Downloads/fuse-exfat-1.1.0-2.3.x86_64.rpm
I first tried scons and the other source as well but got stuck.
And did manage to get the exfat mount working but am slightly concerned about the library too old warning. Can I possibly loose data on copying to it…
Now I have to get back to id the other drives for the raid… Thank you for your help.
Hi
You should rebuild the src rpm I pointed you at as your user…
rpmbuild --rebuild fuse-exfat-1.1.0-1.1.src.rpm
Then install the build rpm as root user, there should be no need for
those glib libraries, where did they come from, best remove if they are
not from SLES 11 SP3 and roll back to SUSE ones.
–
Cheers Malcolm °¿° LFCS, SUSE Knowledge Partner (Linux Counter #276890)
SUSE Linux Enterprise Desktop 12 GNOME 3.10.1 Kernel 3.12.39-47-default
If you find this post helpful and are logged into the web interface,
please show your appreciation and click on the star below… Thanks!
This sounds like good advice but I am now in new territory. Now I need some fixing. I rpm -e the previous one but could not remove the others
And now as user
rpmbuild --rebuild fuse-exfat-1.1.0-1.1.src.rpm
Installing fuse-exfat-1.1.0-1.1.src.rpm
warning: InstallSourcePackage: Header V3 RSA/SHA1 signature: NOKEY, key ID 3508c1dd
error: unpacking of archive failed on file /usr/src/packages/SPECS/fuse-exfat.spec: cpio: rename failed - Operation not permitted
error: fuse-exfat-1.1.0-1.1.src.rpm cannot be installed
and as root…
…
AttributeError: SConfBase instance has no attribute ‘CheckCC’:
File “/usr/src/packages/BUILD/fuse-exfat-1.1.0/SConstruct”, line 85:
if not conf.CheckCC():
error: Bad exit status from /var/tmp/rpm-tmp.68019 (%build)
RPM build errors:
InstallSourcePackage: Header V3 RSA/SHA1 signature: NOKEY, key ID 3508c1dd
Bad exit status from /var/tmp/rpm-tmp.68019 (%build)
You are right… I got these from an outside source… rpm.pbone.net … I am desperate …
Hi
You rebuild as user, install as root, and use zypper not rpm…
zypper in <some_rpm>
As root user clean out the /usr/src/packages/ directories, then as root
chmod them
cd /usr/src/packages/
rm BUILD/*
Repeat for each directory, then;
cd /usr/src/packages/
pwd
chmod 0777 *
Don’t get desperate, use OBS in your searches and only use rpms for SLE
11 SP3 and you will be fine, else build locally from a src rpm.
–
Cheers Malcolm °¿° LFCS, SUSE Knowledge Partner (Linux Counter #276890)
SUSE Linux Enterprise Desktop 12 GNOME 3.10.1 Kernel 3.12.39-47-default
If you find this post helpful and are logged into the web interface,
please show your appreciation and click on the star below… Thanks!
I feel like a noob. Despite your good instructions I am still missing something.
I still have 2 DeprecationWarnings and an error
SConfBase instance has no attribute ‘CheckCC’:
What I did as root:
cd /usr/src/packages
rm -r BUILD.*
chmod 0777 SOURCES/*
rm -r SOURCES/fuse-exfat-1.1.0.tar.*
rm -r SPECS/fuse-exfat.spec* (thus my chmod 0777 SPECS/* was not required)
rm -r /var/tmp/rpm-tmp.*
rm -r /var/tmp/fuse-exfat-1.1.0-build*
As user
~/Downloads> rpmbuild --rebuild fuse-exfat-1.1.0-1.1.src.rpm
Installing fuse-exfat-1.1.0-1.1.src.rpm
warning: InstallSourcePackage: Header V3 RSA/SHA1 signature: NOKEY, key ID 3508c1dd
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.24275
scons
scons: Reading SConscript files …
/usr/lib64/python2.6/site-packages/SCons/Platform/posix.py:38: DeprecationWarning: The popen2 module is deprecated. Use the subprocess module.
import popen2
/usr/lib64/python2.6/site-packages/SCons/Tool/msvs.py:37: DeprecationWarning: the md5 module is deprecated; use hashlib instead
import md5
AttributeError: SConfBase instance has no attribute ‘CheckCC’:
File “/usr/src/packages/BUILD/fuse-exfat-1.1.0/SConstruct”, line 85:
if not conf.CheckCC():
error: Bad exit status from /var/tmp/rpm-tmp.24275 (%build)
RPM build errors:
InstallSourcePackage: Header V3 RSA/SHA1 signature: NOKEY, key ID 3508c1dd
Bad exit status from /var/tmp/rpm-tmp.24275 (%build)
Do you have sources for these as well?
I am about to go on leave – reason for desparation - and - OBS
What is OBS? From: “https://obsproject.com/”: Open Broadcaster Software is free and open source software for video recording and live streaming
Locally we refer to OBS as Old Brown Sherry - Great for stress releaving!
I have managed to down grade glibc 2.14 to 2.11 with YAST Add Remove Software
Thanks for the help
I now have a couple of options for this:
File “/usr/src/packages/BUILD/fuse-exfat-1.1.0/SConstruct”, line 85:
if not conf.CheckCC():
error: Bad exit status from /var/tmp/rpm-tmp.70842 (%build)
wait for someone to help ;^)
try extract the rpm and comment out from line 85 to 89 of SConstruct and rebuild or manually run – either of which I am not sure of
Go on leave and try another day = Unhappy boss
Try the other dirty method and hope for the best… If data is corrupt… I can always try other routes.
OBS…
It’s used for build rpm’s etc, for the distribution, development and
users…
–
Cheers Malcolm °¿° LFCS, SUSE Knowledge Partner (Linux Counter #276890)
SUSE Linux Enterprise Desktop 12 GNOME 3.10.1 Kernel 3.12.39-47-default
If you find this post helpful and are logged into the web interface,
please show your appreciation and click on the star below… Thanks!
I could not find my way on OBS.
I went for option 2 but could not get the rpm to install binaries - no error. I used rpmbuild -ba and then --rebuild.
Then I went for option 4 again with the openSUSE 12.4 rpm and hope for the best. So far so good.
