Problem with SUSE 12.1 JeOS image (Vmware)

SUSE Product Topics SLES Install-Boot
1

I downloaded the JeOS image for Vmware from:

https://www.suse.com/eval/download?event_id=SGDGNTD20639&event_name=Eval:
+JeOS&icid=SGDGNTD20640&icname=Eval:+JeOS
+Nurture&build=xXfp0Cx4V1M~&login_required=1#

I verified that the download was good, and the MD5 checksum matches the
available one from that page.

In VMware, then, I make a new VM, use existing VMDK, and start the VM. I
see the Grub boot screen, and the initial OS load begins, but then ends
with:

+ export'biosBootDevice=No devices matches MBR ID: 0x9806f0f7 !'
+ biosBootDevice='No devices matches MBR ID: 0x9806f0f7 !'
+ sleep 1
+ true
+ ifix=0
+ match_count=0
+ try_count=15
+ '[' 15 -eq 15 ']'
+ export 'biosBootDevice=Failed to find boot device !'
+ biosBootDevice='Failed to find boot device !'
+ return 1
+ systemExcption 'Failed to find boot device !' reboot
+ local 'IFS=
'
+ set +x
+ echo -e '[  20.734726] Failed to find boot device !'
+ '[' 0 = 0 ']'
+ set +x
+ case "$what" in
+ cat /var/log/boot.kiwi
[   21.439475] rebootException: reboot in 120 sec...

Is this image actually known to be good?

–
David Gersic
Knowledge Partner http://forums.microfocus.com
If you find this post helpful, please click on the star below.

2

Hi
That error "biosBootDevice=No devices matches MBR ID: normally indicates boot order, check the VM boot order and make sure it’s pointing at the image.

3

On Sat, 11 Jun 2016 17:04:01 +0000, malcolmlewis wrote:
[color=blue]

Hi
That error "biosBootDevice=No devices matches MBR ID: normally indicates
boot order, check the VM boot order and make sure it’s pointing at the
image.[/color]

I don’t see anything interesting in the BIOS options, but I moved “Hard
Disk” ahead of “Removable Devices” to see if that would help. It didn’t.

In the VM settings, there is only one disk, this 24G VMDK.

It seems to be connected correctly, because I get the Grub boot ok with
two options:

SLES12-SP1-JeOS-for-VMware [ VMX ]
Failsafe -- SLES12-SP1-JeOS-for-VMware [ VMX ]

which seems to be correct for this image. It’s after Grub, with the
actual OS loading where it doesn’t seem to be able to figure out what to
do.

I tried booting from an OpenSUSE Live CD, which works, and it looks to me
like the disk is there. fdisk -l reports:

Disk /dev/sda: 24 GiB, 25769803776 bytes, 50331648 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 4378BEB3-7E8F-4887-AF19-9A128869DA59

Device      Start      End  Sectors  Size Type
/dev/sda1    2048     6147     4100    2M BIOS boot
/dev/sda2    8192   417795   409604  200M EFI System
/dev/sda3  419840 50331520 49911681 23.8G Linux filesystem

Disk /dev/loop0: 466.2 MiB, 488833024 bytes, 954752 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes

I can successfully mount the EFI and root partitions without errors, so I
think the file systems are ok.

All of which leads me back to my original question. Is this image
actually good?

–
David Gersic
Knowledge Partner http://forums.microfocus.com
If you find this post helpful, please click on the star below.

4

On 10/06/16 20:49, David Gersic wrote:
[color=blue]

I downloaded the JeOS image for Vmware from:

https://www.suse.com/eval/download?event_id=SGDGNTD20639&event_name=Eval:
+JeOS&icid=SGDGNTD20640&icname=Eval:+JeOS
+Nurture&build=xXfp0Cx4V1M~&login_required=1#

I verified that the download was good, and the MD5 checksum matches the
available one from that page.

In VMware, then, I make a new VM, use existing VMDK, and start the VM. I
see the Grub boot screen, and the initial OS load begins, but then ends
with:

+ export'biosBootDevice=No devices matches MBR ID: 0x9806f0f7 !'
> + biosBootDevice='No devices matches MBR ID: 0x9806f0f7 !'
> + sleep 1
> + true
> + ifix=0
> + match_count=0
> + try_count=15
> + '[' 15 -eq 15 ']'
> + export 'biosBootDevice=Failed to find boot device !'
> + biosBootDevice='Failed to find boot device !'
> + return 1
> + systemExcption 'Failed to find boot device !' reboot
> + local 'IFS=
> '
> + set +x
> + echo -e '[  20.734726] Failed to find boot device !'
> + '[' 0 = 0 ']'
> + set +x
> + case "$what" in
> + cat /var/log/boot.kiwi
> [   21.439475] rebootException: reboot in 120 sec...

Is this image actually known to be good?[/color]

Which VMware product (and version) are you trying this with? ESXi,
Workstation, Player, Fusion, etc.

Having just downloaded it to my Macbook I appear to be seeing the same
behaviour as you with Fusion Professional 7.1.3.

I think on boot the VM is enumerating various storage devices
(scsi[0-29] and [ata[1-30]) and not finding a suitable one - it doesn’t
appear to be checking for sdX but perhaps I’m not using a supported
VMware product?

HTH.

Simon
SUSE Knowledge Partner

If you find this post helpful and are logged into the web interface,
please show your appreciation and click on the star below. Thanks.

5

On 13/06/16 17:26, Simon Flood wrote:
[color=blue]

Which VMware product (and version) are you trying this with? ESXi,
Workstation, Player, Fusion, etc.

Having just downloaded it to my Macbook I appear to be seeing the same
behaviour as you with Fusion Professional 7.1.3.

I think on boot the VM is enumerating various storage devices
(scsi[0-29] and [ata[1-30]) and not finding a suitable one - it doesn’t
appear to be checking for sdX but perhaps I’m not using a supported
VMware product?[/color]

I’ve been poking around a bit and now have the same SLES12 SP1 JeOS
booting under Fusion on my MacBook.

The thing that has made it work is in the Settings to change the Hard
Disk from SCSI (the default when importing an existing disk image) to
SATA - see Bus type under the “hidden” Advanced options.

HTH.

Simon
SUSE Knowledge Partner

If you find this post helpful and are logged into the web interface,
please show your appreciation and click on the star below. Thanks.

6

On Mon, 13 Jun 2016 17:01:27 +0000, Simon Flood wrote:
[color=blue]

On 13/06/16 17:26, Simon Flood wrote:
[color=green]

Which VMware product (and version) are you trying this with? ESXi,
Workstation, Player, Fusion, etc.

Having just downloaded it to my Macbook I appear to be seeing the same
behaviour as you with Fusion Professional 7.1.3.

I think on boot the VM is enumerating various storage devices
(scsi[0-29] and [ata[1-30]) and not finding a suitable one - it doesn’t
appear to be checking for sdX but perhaps I’m not using a supported
VMware product?[/color]

I’ve been poking around a bit and now have the same SLES12 SP1 JeOS
booting under Fusion on my MacBook.

The thing that has made it work is in the Settings to change the Hard
Disk from SCSI (the default when importing an existing disk image) to
SATA - see Bus type under the “hidden” Advanced options.[/color]

Thanks Simon, I’ll give that a try. I’m using Workstation here.

–
David Gersic
Knowledge Partner http://forums.microfocus.com
If you find this post helpful, please click on the star below.

7

On Mon, 13 Jun 2016 17:01:27 +0000, Simon Flood wrote:
[color=blue]

The thing that has made it work is in the Settings to change the Hard
Disk from SCSI (the default when importing an existing disk image) to
SATA - see Bus type under the “hidden” Advanced options.[/color]

Thanks, Simon, that did it. The option for SATA isn’t hidden in
Workstation, it’s just not obvious that you’d need to change the disk
type from the default of SCSI.

–
David Gersic
Knowledge Partner http://forums.microfocus.com
If you find this post helpful, please click on the star below.