SLES11.1 dont detect my Monitor

[COLOR=#333333]Hi Is anyone could kindly help me about the below problem?[/COLOR]
[COLOR=#333333]after installed SUSE 11 SP1 successfully, I got one new Monitor HP ZR2440w Monitor.[/COLOR]
[COLOR=#333333]but unfortunately my SUSE didnt detected this change even I reboot the system.[/COLOR]
[COLOR=#333333]via the hwinfo, I got the below output for the Monitor:[/COLOR]

[COLOR=#333333]120: None 00.0: 10000 Monitor[/COLOR]
[COLOR=#333333][Created at fb.71][/COLOR]
[COLOR=#333333]Unique ID: rdCR.EY_qmtb9YY0[/COLOR]
[COLOR=#333333]Hardware Class: monitor[/COLOR]
[COLOR=#333333]Model: “Generic Monitor”[/COLOR]
[COLOR=#333333]Vendor: “Generic”[/COLOR]
[COLOR=#333333]Device: “Monitor”[/COLOR]
[COLOR=#333333]Resolution: 1600x1200@77Hz[/COLOR]
[COLOR=#333333]Driver Info #0:[/COLOR]
[COLOR=#333333]Max. Resolution: 1600x1200[/COLOR]
[COLOR=#333333]Vert. Sync Range: 50-90 Hz[/COLOR]
[COLOR=#333333]Hor. Sync Range: 31-96 kHz[/COLOR]
[COLOR=#333333]Config Status: cfg=new, avail=yes, need=no, active=unknown[/COLOR]

[COLOR=#333333]but actully my other friends who are using the same Model Monitor can be deteced by SUSE11.1 successfully.[/COLOR]
[COLOR=#333333]would anyone could help me how could I force SUSE to detect this change?[/COLOR]
[COLOR=#333333]Thanks a lot for your support.[/COLOR]
[COLOR=#333333]P.S. I am one newbie for SUSE.[/COLOR]

Hi
Have you opened YaST to reconfigure the Display settings?


Cheers Malcolm °¿° (Linux Counter #276890)
SUSE Linux Enterprise Desktop 11 (x86_64) Kernel 3.0.34-0.7-default
up 12:54, 2 users, load average: 0.49, 0.43, 0.35
CPU Intel i5 CPU M520@2.40GHz | Intel Arrandale GPU

[QUOTE=malcolmlewis;5499]Hi
Have you opened YaST to reconfigure the Display settings?


Cheers Malcolm °¿° (Linux Counter #276890)
SUSE Linux Enterprise Desktop 11 (x86_64) Kernel 3.0.34-0.7-default
up 12:54, 2 users, load average: 0.49, 0.43, 0.35
CPU Intel i5 CPU M520@2.40GHz | Intel Arrandale GPU[/QUOTE]

Thanks for your reply.
I have opened YAST->Display Setting, but there is NO item which suitble for this Monitor.
in other collegues’s YAST Display setting, there is one item under the HPW section which is mapping with the corresponding Monitor.
So Now in my YAST, it is selected as -VESA.

Hi
Scroll the list and select LCD then the display size, else if the is a
cd with the eidd file, you can read from that.


Cheers Malcolm °¿° (Linux Counter #276890)
SUSE Linux Enterprise Desktop 11 (x86_64) Kernel 3.0.34-0.7-default
up 14:46, 2 users, load average: 0.37, 0.36, 0.42
CPU Intel i5 CPU M520@2.40GHz | Intel Arrandale GPU