I am configuring 2 nodes cluster by installing SLES10 sp4 as OS on both the nodes.
My setup Environment includes:
a). Two Servers(Installed with SLES10 SP4)
b). FC Switch
c). SAN storage
I have performed the configurations as follows:
Step 1: Installed VNC on both the nodes to take the GUI sessions
Step 2: I have installed OES2SP3 and NTP on both the nodes using YAST.
Step 3: I have configured the hacluster pwd on both the nodes by running the following command on both the nodes.
passwd hacluster
Step 4: I have installed SYSSTAT tool on both the nodes using Yast.
Step 5:I have edit the Kernel file (/etc/sysconfig/kernel) by adding the following line:
INITRD_MODULES=“ata_piix megaraid_sas processor thermal fan reiserfs edd lpfc”
Step 5: I have configured Password less SSH on both the nodes.
Step 6: I have performed the heartbeat configuration using Yast on Node-1 and Node-2
Now when I am trying to add STONITH as a cluster resource using Linux HA management (hb_gui)
Add items-> native->
Resource_id: ssh_stonith
Name : ssh
Class provide: external/ssh
Hostlist: node-1 node-2
Using clone
I am able to add the resource, but not able to start it.
Even after clicking on the play button the resource remains offline.
I would like to know whether the above steps which I am following to configure the 2-Node Cluster is proper or not?
Kindly guide me with proper connection diagram and configuration steps.
I am configuring 2 nodes cluster by installing SLES10 sp4 as OS on both
the nodes.
My setup Environment includes:
a). Two Servers(Installed with SLES10 SP4)
b). FC Switch
c). SAN storage
I have performed the configurations as follows:
Step 1: Installed VNC on both the nodes to take the GUI sessions
Step 2: I have installed OES2SP3 and NTP on both the nodes using YAST.
Step 3: I have configured the hacluster pwd on both the nodes by running
the following command on both the nodes.
passwd hacluster
Step 4: I have installed SYSSTAT tool on both the nodes using Yast.
Step 5:I have edit the Kernel file (/etc/sysconfig/kernel) by adding the
following line:
INITRD_MODULES=“ata_piix megaraid_sas processor thermal fan reiserfs edd
lpfc”
Step 5: I have configured Password less SSH on both the nodes.
Step 6: I have performed the heartbeat configuration using Yast on
Node-1 and Node-2
Now when I am trying to add STONITH as a cluster resource using Linux HA
management (hb_gui)
Add items-> native->
Resource_id: ssh_stonith
Name : ssh
Class provide: external/ssh
Hostlist: node-1 node-2
Using clone
I am able to add the resource, but not able to start it.
Even after clicking on the play button the resource remains offline.
I would like to know whether the above steps which I am following to
configure the 2-Node Cluster is proper or not?
Kindly guide me with proper connection diagram and configuration steps.[/color]
You should also note that both SLES10 SP4 and OES2 SP3 are now out of
General Support with SLES11 SP3 and OES11 SP1 (which installs on SLES11
SP2 - OES11 SP2 which installs on SLES11 SP3 is currently in beta) the
latest versions respectively.
HTH.
Simon
SUSE Knowledge Partner
If you find this post helpful and are logged into the web interface,
please show your appreciation and click on the star below. Thanks.
Your mention of OES2 SP3 leads me to ask if the aim here is to end up
with a “fault-tolerant” OES server?
Yes, my main aim is to configure a “fault-tolerant” 2-node cluster with the following two important properties:
[LIST=1]
[]Failover, and
[]Failback
[/LIST]
You should also note that both SLES10 SP4 and OES2 SP3 are now out ofGeneral Support
Yes, I understand that both the SLES10 SP4 and OES2 SP3 are out of General support now. But our requirement is to use only OES2 for cluster setup.
So, I am bound to use the same. Any help in configuring this setup will be highly appriciable.
I will implement your suggestions in my setup and will update you in case of any issue.
[COLOR=#333333][FONT=Arial]Thanks and Regards![/FONT][/COLOR]
[COLOR=#333333][FONT=Arial]Gaurav[/FONT][/COLOR]
I am configuring 2 nodes “fault-tolerant” cluster by installing SLES10 sp4 as OS on both the nodes. I am following steps to do the same:
Step 1: Installed VNC on both the nodes to take the GUI sessions
Step 2: I have installed OES2SP3 and configured e-Directory for Node-1.
Step 3:NTP on both the nodes using YAST.
Step 4: I have configured the hacluster pwd on both the nodes by running the following command on both the nodes.
passwd hacluster
Step 5: I have installed SYSSTAT tool on both the nodes using Yast.
Step 6:I have edit the Kernel file (/etc/sysconfig/kernel) by adding the following line:
INITRD_MODULES=“ata_piix megaraid_sas processor thermal fan reiserfs edd lpfc”
Step 7: I have configured Password less SSH on both the nodes.
Step 8: I have performed the heartbeat configuration using Yast on Node-1 and Node-2
Step 9:Now I need to configure Novell Cluster Services.
I would like to know whether the above steps which I am following to configure the 2-Node Cluster is proper or not?
Also kindly let me know whether I can configure the STONITH after configuring the NCS?
I am configuring 2 nodes “fault-tolerant” cluster by installing SLES10
sp4 as OS on both the nodes. I am following steps to do the same:
Step 1: Installed VNC on both the nodes to take the GUI sessions
Step 2: I have installed OES2SP3 and configured e-Directory for Node-1.
Step 3:NTP on both the nodes using YAST.
Step 4: I have configured the hacluster pwd on both the nodes by running
the following command on both the nodes.
passwd hacluster
Step 5: I have installed SYSSTAT tool on both the nodes using Yast.
Step 6:I have edit the Kernel file (/etc/sysconfig/kernel) by adding the
following line:
INITRD_MODULES=“ata_piix megaraid_sas processor thermal fan reiserfs edd
lpfc”
Step 7: I have configured Password less SSH on both the nodes.
Step 8: I have performed the heartbeat configuration using Yast on
Node-1 and Node-2
Step 9:Now I need to configure Novell Cluster Services.
I would like to know whether the above steps which I am following to
configure the 2-Node Cluster is proper or not?
Also kindly let me know whether I can configure the STONITH after
configuring the NCS?
Kindly guide me with proper configuration steps.[/color]
I think that you’ve misunderstood my original reply - if you want to
create a fault-tolerant OES cluster then you use Novell Cluster Services
and not STONITH (or any other SLES high availability options).
HTH.
Simon
SUSE Knowledge Partner
If you find this post helpful and are logged into the web interface,
please show your appreciation and click on the star below. Thanks.
I was able to configure the Novell Cluster Services in my setup. But still I am facing the following issues:
Whenever I am trying to run the command “nssmu” to configure the SBD partition, I am getting the “segmentation fault” error message.
Also during OES installation in my “Open Enterprise Server Configuration” window on Node-2, I am getting the following output:
LDAP Server:
NSS Admin Name :cn=node2admin.cn=admin.o=xxxxx
Whereas I have already configured the LDAP server on Node2.
During the OES installation I got the following error on node-2:
In “Saving Linux User Management Configuration” window:
Unable to connect to LDAP server xx.xx.xx.xx or the specified userc=admin,o=xxxx does not have enough privileges toconfigure Linux User ManagementPlease correct the problem and re-run namconfig after the install
unable to LUM add/modify ‘admingroup’
unable to LUM add/modify ‘admin’
I was able to resolve the above OES installation issue.
What I did is that I re-installed the SLES 10 SP4 on both the nodes and then I reinstalled the OES2 SP3 on both the nodes.
But I am still facing the following issues:
[LIST=1]
[*]The problem occurs when I install OES. Initially I am hit with the following problems
evms-ha-2.5.5-24.76.4.x86_64 conflicts with other resolvables
-evms-ha-2.5.5-24.76.4.x86_64 conflicts with: novell-cluster-services-1.8.8.723-0.7.x86_64[Novell OES2-SP3]
-Conflict Resolution:
( ) delete evms-ha
delete evms-ha-2.5.5-24.76.4.x86_64
( ) do not install novell-cluster-services
do not install novell-cluster-services-1.8.8.723-0.7.x86_64[Novell OES2-SP3]
( ) Ignore this conflict of evms-ha pattern:ha_sles-10-51.54.16.x86_64 cannot be installed due to missing dependencies
-There are no installable providers of evms-ha for pattern:ha_sles-10-51.54.16.x86_64
-Conflict Resolution:
( ) delete ha_sles
delete pattern:ha_sles-10-51.54.16.x86_64
( ) Ignore this requirement just here pattern:xen_server-10-51.54.16.x86_64 conflicts with other resolvables
-pattern:xen_server-10-51.54.16.x86_64 conflicts with pattern: novell-nss-10-141.x86_64[Novell OES2-SP3]
-Conflict Resolution:
( ) delete xen_server
delete pattern:xen_server-10-51.54.16.x86_64
( ) do not install novell-nss
do not install pattern: novell-nss-10-141.x86_64[Novell OES2-SP3]
( ) Ignore this rconflict of xen_server
So, I initially chose ignore for all three options and the cluster came up fine. I was also able to join the second node to the cluster and all seemed to be going smoothly. iManager allowed me to manage the cluster, and then I set about trying to create a shared resource.
NSSMU was no longer functioning, and kept giving ‘segmentation fault’ errors.
2. I find that if I shutdown (unload) NCS I can manage NSS fine with both imanager and nssmu, however as soon as NCS is running I get segmentation errors on NSSMU and CIMON errors on imanager.
[COLOR=#333333] But when I create a new Pool on the Storage Array NSSMU claims that CVB has not [/COLOR][COLOR=#333333]registered for pool events.
Exact Message:[/COLOR]
[COLOR=#333333] 21710 CVB has not registered for pool events.
[/COLOR][COLOR=#333333]
I am not able to understand this error und how to solve it. [/COLOR][COLOR=#333333]How can I create new Pools for new Volumes?
[/COLOR]
On Fri, 07 Feb 2014 07:34:01 +0000, gaurav wrote:
[color=blue]
I was able to resolve the above OES installation issue.[/color]
Since this is (no longer) about SLES/HA, you’d probably be better off
asking in the OES support forums, where you’ll find people more familiar
with OES and NCS clustering.