xdm not working on console after update

[xjom71]

Hi!

After installing the key for SLES 12 on our DELL PowerEdge R320, I got some updates for X11:

2015-03-27 08:00:47 xorg-x11-server-7.6_1.15.2-21.1.x86_64.rpm installed ok

Additional rpm output:

Updating /etc/sysconfig/displaymanager…

After this, it seems that I can’t log in to gdm, because the screen turns black after the green running dots have been running 8 times.

I changed /etc/permissions.local to be able to run startx after [Ctrl]+[Alt]+F1, but it is still the same black screen even if I restart the display-manager.

If I change DISPLAYMANAGER to “kdm” in the /etc/sysconfig/displaymanager you get the grey SUSE-background, and a system error window in the lower left corner, but you can’t actually access anything at all.

The only thing in the ~/.xsession-error-logs is:
gnome-session-is-accelerated: llvmpipe detected.

The only error I have seen in the Xorg.n.log is:
[ 2144.993] (EE) mga: The PCI device 0x534 at 06@00:00:0 has a kernel module claiming it.
[ 2144.993] (EE) mga: This driver cannot operate until it has been unloaded.

No files in the /etc/X11/xorg.conf.d/-folder has been changed/updated.

The xdm status is up-and-running:
display-manager.service - X Display Manager
Loaded: loaded (/usr/lib/systemd/system/display-manager.service; enabled)
Active: active (running) since Mon 2015-04-06 17:12:51 CEST; 58min ago
Process: 3364 ExecStop=/usr/lib/X11/display-manager stop (code=exited, status=0/SUCCESS)
Process: 3663 ExecReload=/usr/lib/X11/display-manager reload (code=exited, status=0/SUCCESS)
Process: 3377 ExecStart=/usr/lib/X11/display-manager start (code=exited, status=0/SUCCESS)
Main PID: 3390 (gdm)
CGroup: /system.slice/display-manager.service
├─3390 /usr/sbin/gdm
└─3396 /usr/bin/Xorg :0 -background none -noreset -verbose 3 -logfile /dev/null -auth /run/gdm/auth-for-gdm-FpAmt3/database -seat seat0 vt7

We did a test with enabling VNC, but that did not help. It is black screen on VNC also.

I have tried booting with both nomodeset and failsafe, but no luck, nothing else than the black screen…

I am out of ideas right now - someone who can point me in the right direction of further analysis?

BR
/Mattias

[mikewillis]

Well since no one’s else has replied…

@xjom71;27287

After installing the key for SLES 12 on our DELL PowerEdge R320, I got some updates for X11:

2015-03-27 08:00:47 xorg-x11-server-7.6_1.15.2-21.1.x86_64.rpm installed ok

Additional rpm output:

Updating /etc/sysconfig/displaymanager…

Well that shows one update not some updates. What else got installed at the same time? Did all the updates install successfully? Are there any outstanding updates? Since X isn’t starting you can use zypper. If you don’t already know, this will show available updates

$ zypper refresh
$ zypper lu[/CODE]

This will install all updates
[CODE]$ zypper up[/CODE]


[QUOTE=xjom71;27287]
After this, it seems that I can't log in to gdm, because the screen turns black after the green running dots have been running 8 times.
[/QUOTE]
If GDM doesn’t appear then you can't log in to it ;)  

Do either of
[CODE]$ pidof Xorg
$ pidof gdm

Return a PID? From what you’ve said it sounds like they won’t.

@xjom71;27287

If I change DISPLAYMANAGER to “kdm” in the /etc/sysconfig/displaymanager you get the grey SUSE-background, and a system error window in the lower left corner, but you can’t actually access anything at all.

KDM isn’t included in SLES 12. I don’t have a SLES 12 install to hand right now but if the comments in /etc/sysconfig/displaymanager about values for DISPLAYMANAGER are the same as in SLED 12, which I suspect they are, they somewhat misleading. It’s not a list of values that are valid for SLES 12.

@xjom71;27287

The only thing in the ~/.xsession-error-logs is:
gnome-session-is-accelerated: llvmpipe detected.

If X is broken to the extent that it fails to start up boot I doubt anything is going to get written to any user’s .xsession-errors file. Does the time stamp on the file you’re looking at indicate that it’s been updated within a relevant time period?

@xjom71;27287

The only error I have seen in the Xorg.n.log is:
[ 2144.993] (EE) mga: The PCI device 0x534 at 06@00:00:0 has a kernel module claiming it.
[ 2144.993] (EE) mga: This driver cannot operate until it has been unloaded.

What’s the output of

$ lspci -nnk |  grep -A 3 VGA

That should show the make/mode, PCI id of video card and the module that’s being used for it. E.g. on the machine I’m typing on I get this:

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03) Subsystem: Intel Corporation Device [8086:7270] Kernel driver in use: i915 Kernel modules: i915

@xjom71;27287

No files in the /etc/X11/xorg.conf.d/-folder has been changed/updated.

Is there an /etc/X11/xorg.conf file?

What’s the output of

$ grep Driver /etc/X11/xorg.conf.d/*

@xjom71;27287

The xdm status is up-and-running:
display-manager.service - X Display Manager
Loaded: loaded (/usr/lib/systemd/system/display-manager.service; enabled)
Active: active (running) since Mon 2015-04-06 17:12:51 CEST; 58min ago
Process: 3364 ExecStop=/usr/lib/X11/display-manager stop (code=exited, status=0/SUCCESS)
Process: 3663 ExecReload=/usr/lib/X11/display-manager reload (code=exited, status=0/SUCCESS)
Process: 3377 ExecStart=/usr/lib/X11/display-manager start (code=exited, status=0/SUCCESS)
Main PID: 3390 (gdm)
CGroup: /system.slice/display-manager.service
├─3390 /usr/sbin/gdm
└─3396 /usr/bin/Xorg :0 -background none -noreset -verbose 3 -logfile /dev/null -auth /run/gdm/auth-for-gdm-FpAmt3/database -seat seat0 vt7

Does the PID indicated there exist?

When posting contents of log files and such, wrap it in CODE tags, it helps a lot with readability and prevents the forum software potentially turning bits of it in to smiley faces and such. Look for the # button on the toolbar when composing.

[xjom71]

[QUOTE=mikewillis;27301]What else got installed at the same time?
[/QUOTE]

A whole lot.

2015-03-27 08:00:38|install|glibc|2.19-20.3|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|8c90fc3d2951c9f04351115f07da46030402553b90cf4c3648cc8b8cde7bb79a|
2015-03-27 08:00:38|install|glibc-32bit|2.19-20.3|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|c1037b56bbb77fc7509d05f8b05d87e9e205774679e8a89376acb4ef16bfc9a3|
2015-03-27 08:00:39|install|glibc-i18ndata|2.19-20.3|noarch||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|72d8a1749e28833a5e5b22f929f899ad52802227ecbc7bebd44df74a4b911ab8|
2015-03-27 08:00:41|install|libicu52_1-data|52.1-7.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|bfea95cc4e1ce097fe17393b5c6d2494ceb27f27803e1004c398970152660117|
2015-03-27 08:00:41|install|pam-doc|1.1.8-14.1|noarch||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|6a4a663ec8f7e331a5c03f96a4602b9fc92fe569c76f383fc82c473d66ccd289|
2015-03-27 08:00:41|install|supportutils|3.0-53.1|noarch||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|69f0f6a657bb4e2cbc7ccccb6d0b8842a57828f628a533d9bf122d7c06581059|
2015-03-27 08:00:41|install|timezone-java|2015b-0.11.1|noarch||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|3485b4cb707f3584742f9ee7ffac4ed2cecc266e4eff609cfbdad5aadd5e10b2|
2015-03-27 08:00:42|install|timezone|2015b-0.11.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|c19b976aabc3640177a21399878d86914b97e542394ae3229df8c721b7c6b6fb|
2015-03-27 08:00:42|install|vorbis-tools|1.4.0-19.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|9c1e0d0bf0644aed319b01a2751dcf5c7e9d0341dcf1046ef74befa1d68846b4|
2015-03-27 08:00:42|install|unzip|6.00-32.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|e639ac67ec7f052a298e44d93e08eb69d896cf5dc4956ee69698468db8229334|
2015-03-27 08:00:42|install|pam|1.1.8-14.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|4dee9390c4912505edea3bfc10c3d93ae23aa8fcceab28fce139ed98524e6c5d|
2015-03-27 08:00:42|install|p11-kit|0.20.3-4.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|11e923d2ddfb0716c5b886c93a12348e3ed924f8f223563ec2df2f002b287504|
2015-03-27 08:00:42|install|open-iscsi|2.0.873-23.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|22d64e84a597df8c9d818b62bcb1391383aa934b8f37ed0187b646758df41900|
2015-03-27 08:00:42|install|nscd|2.19-20.3|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|fcfd8aea71172be4b126414ef8f1fb9280247d18c905acaf92134266170da711|
2015-03-27 08:00:43|install|libtirpc1|0.2.3-8.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|bc8aea8fe2f88e51d18ed2b739cfc3de78d5190a22d7cdc43e1791b71a23e521|
2015-03-27 08:00:43|install|libopenssl1_0_0|1.0.1i-20.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|c31dbf3f14bf8d9a976a71f1c85bf1f1cff5a6772c6b88fe88fca03d13b3ff9a|
2015-03-27 08:00:43|install|libjasper1|1.900.1-170.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|9ee74cdf5e8467b870ef2a3b6a21759bdb3fa220d56b232e1137878fc6491983|
2015-03-27 08:00:43|install|libhavege1|1.9.1-8.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|4a39a79d57c64b1fdfde29caf544d6fc671e4599c7251e70e81c5d06d4335ccd|
2015-03-27 08:00:43|install|libfreetype6|2.5.3-5.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|a170b310f236c6b7d337db23f2e3d25d28cd366ed007ae55279f268ed8516b86|
2015-03-27 08:00:43|install|libelf1|0.158-6.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|b232b500a38c9ba67698552e60bd696e4d30d8da8f04fd98b8e555f6ed2e2608|
2015-03-27 08:00:43|install|libdbus-1-3|1.8.16-14.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|e6d7cf8926fdc9fdafdebd70b3ec689d1dfefd827cb4c8d4b2a65ddeb41a5054|
2015-03-27 08:00:43|install|libbtrfs0|3.16.2-7.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|3661f3d944258826f6b09ab2c513bce5cc780c5bc42f8c3b8d70f40c3f3ae088|
2015-03-27 08:00:43|install|libboost_iostreams1_54_0|1.54.0-13.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|daaaf0356002f265d2f5c5506542bfbdc45ab6c3233a8e08b7e3e3c8df72c7b8|
2015-03-27 08:00:43|install|libboost_date_time1_54_0|1.54.0-13.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|822dc39325069989c559f1543b1458ee6377c36fa1f9ff57d782c9fe3f6e234b|
2015-03-27 08:00:43|install|kpartx|0.5.0-33.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|f19e833eb00db82587cbda8ca4bd1d355e0d2fb1cac44fcc78cd3ab98443dda6|
2015-03-27 08:00:43|install|iscsiuio|0.7.8.2-23.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|da3fa00ee7ae99f73f90617ffa7b6c8db984ea767ae4631b2a5d64dc5796d7e7|
2015-03-27 08:00:45|install|glibc-locale|2.19-20.3|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|a841e248840617b15c88c56dc7657479c4c30918f03f5174b25384a1dd8658d1|
2015-03-27 08:00:46|install|glibc-devel|2.19-20.3|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|d5aeb21b94ab59991247eabc4418cd66dc860a030d5befec112d72e2d9768be4|
2015-03-27 08:00:46|install|btrfsprogs|3.16.2-7.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|3493e724afdd0257d60a71e80c156dec78cf0e988db26fbd9ba1e07fe0ede1e4|
2015-03-27 08:00:46|install|pam-32bit|1.1.8-14.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|16ceb2f9e775194a3f4c2c9f4c66a29a459592c5cd7f763dc70eb85a77f768ab|
2015-03-27 08:00:46|install|libopenssl1_0_0-32bit|1.0.1i-20.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|cc6ef2c7248e3ff35087d34a8731d39ac93364c7a6273b654cc336006f1fb105|
2015-03-27 08:00:47|install|libfreetype6-32bit|2.5.3-5.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|8e2a06f35fb25841cc98f5bf9248c61df191146258b057d11d9a5984c8be5dee|
2015-03-27 08:00:47|install|libelf1-32bit|0.158-6.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|9cd0e325885cd283f4996c1b1417becc77f1382d12d35c7691cdcaa2d3c09199|
2015-03-27 08:00:47|install|libdbus-1-3-32bit|1.8.16-14.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|0806485ae0389e5e2faeac0faad0c54c32f2cdd4ff06a53fe826117e29fb884e|
2015-03-27 08:00:47|install|glibc-locale-32bit|2.19-20.3|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|8aec5132da9cc1a03a3c83515338ae1a05cf6235faf08d6ec338b58f3b219822|
2015-03-27 08:00:47|install|libicu52_1|52.1-7.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|5f4e32ec30bfc7c13104eea7eda4277e2cf50b1b918e2dd66d4dab6b727f9916|
2015-03-27 08:00:47|install|vorbis-tools-lang|1.4.0-19.1|noarch||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|a9c5bb7620b8f4e95cddd53f0e54d3c711b585fb2a8c9aff62d9834f58580b80|
2015-03-27 08:00:47|install|yast2-packager|3.1.52-6.11|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|aba74802ab3b05ab1bac53dac466937b441b52d382d0655a796f8ebe3a237e11|
# 2015-03-27 08:00:47 xorg-x11-server-7.6_1.15.2-21.1.x86_64.rpm installed ok
# Additional rpm output:
# Updating /etc/sysconfig/displaymanager...
#
2015-03-27 08:00:47|install|xorg-x11-server|7.6_1.15.2-21.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|1c30e189455eb4eb89f8cf05060db88bcd6aad2cf1d839dbd413113454af9c2b|
2015-03-27 08:00:47|install|vsftpd|3.0.2-18.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|ab27db9da20f9f985b0f6a172d820497dbc291f081e8897b6a7f9cf5ffa5417b|
2015-03-27 08:00:48|install|openssl|1.0.1i-20.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|8fc31c0a144ac82c048b7c2f60cc5fa1ef1a021b24d6e20d33e341a0edaa4330|
# 2015-03-27 08:00:48 ntp-4.2.6p5-37.2.x86_64.rpm installed ok
# Additional rpm output:
# Updating /etc/sysconfig/ntp...
#
2015-03-27 08:00:48|install|ntp|4.2.6p5-37.2|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|7127e08112f31edaa30615bff4564b3502d3b7ebdd108c0332f296a84a47cdcd|
2015-03-27 08:00:48|install|haveged|1.9.1-8.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|46fc422daad04155e2a43e91fe510bc1e2133218083d8014a78ff4549629b2a3|
2015-03-27 08:00:48|install|ft2demos|2.5.3-5.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|b76bed38b643fceccd0846b49df40229d2ec3e4e3d27f3c6f923d27d6b2f616d|
2015-03-27 08:00:48|install|libdw1|0.158-6.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|2dbe352b3373effc6bf1304004f85d02ebd10a210b6b80034ca0fc78bfa61a97|
2015-03-27 08:00:48|install|libasm1|0.158-6.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|e5a589aa87ac6845994d458e410f3bbc9f60a1e4023681a1a1fb1983624bd753|
2015-03-27 08:00:48|install|dbus-1|1.8.16-14.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|1018d1bdddeebe56209214fd605407b3b86decf3666be0d3ce71e6071281ca94|
2015-03-27 08:00:49|install|multipath-tools|0.5.0-33.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|c329f79d2e28bd9da706ecb3fb31f2f67434c4c05fd2aad15da91734fa62c58d|
2015-03-27 08:00:49|install|cups-libs-32bit|1.7.5-5.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|849b146f6252fafa85902fc0c8d6ac906379f9af89afe24dd03fd3f6af049140|
2015-03-27 08:00:49|install|elfutils|0.158-6.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|1ebdcb82a98d0c7686d2a64c29cb370baea1fe8cd45e0f3066cad32919449ac3|
2015-03-27 08:00:49|install|libwicked-0-6|0.6.15-8.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|f5a45b977d70cb9eb2d207cab28a93e4ed6145049de1800c5353bd5b095fec89|
2015-03-27 08:00:49|install|dbus-1-x11|1.8.16-14.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|24011683fd93b54d34b7145106972ce6db354891be456c8c0fc911e18e541923|
2015-03-27 08:00:49|install|cups-libs|1.7.5-5.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|deaf87067651acb0a7dc88e1bb771979ee33a65db9d4f55fc1dd9100e0ed163f|
2015-03-27 08:00:53|install|MozillaFirefox|31.5.0esr-24.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|70d2c72a770fe0b4048ca63aea31a3bdd93e4107ccfcdf5d6bd99e02d7aab4a8|
2015-03-27 08:00:53|install|libtevent-util0-32bit|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|6e56627e1ac9d50ebe67989de1cb26a8f892c5f235798b636cc7a7ce19448789|
# 2015-03-27 08:00:53 wicked-0.6.15-8.1.x86_64.rpm installed ok
# Additional rpm output:
# Updating /etc/sysconfig/network/config...
#
2015-03-27 08:00:53|install|wicked|0.6.15-8.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|96c6648340353cd67a5bcb1dd87fb1acbba6ed88211a782f5f1067ebc003a0e1|
2015-03-27 08:00:53|install|cups-client|1.7.5-5.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|47940aca04c42d0a32a3cbb7f907a5592046ccfcce7534120dabab4f60a403b7|
2015-03-27 08:01:03|install|MozillaFirefox-translations|31.5.0esr-24.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|53837c490689f6be35297fbfd4f7b49f1b69adb0d51ff7ed3be449d16d02831f|
2015-03-27 08:01:03|install|libdcerpc-binding0-32bit|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|c21c91c912d4220a84c04957b4430e2c1ef65baaeafd6cb3323ce2250bb148d3|
2015-03-27 08:01:03|install|wicked-service|0.6.15-8.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|96ba500143f6ac6e857f364a8cc699e720489b12fda1bdfc44a13743d9307616|
2015-03-27 08:01:04|install|cups|1.7.5-5.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|bfe5d966450255f5af7f33119d18a2b0efde34678c3c110fdc6baf090f7e1d41|
2015-03-27 08:01:04|install|samba-libs-32bit|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|15a41ea1ea54775bb78ed2b7ba0021dac1a93870f90548ea0f326c41f069fc07|
# 2015-03-27 08:01:05 postfix-2.11.0-8.1.x86_64.rpm installed ok
# Additional rpm output:
# Executing upgrade-configuration.
# Updating /etc/sysconfig/postfix...
# Updating /etc/sysconfig/mail...
#
2015-03-27 08:01:05|install|postfix|2.11.0-8.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|cdc7cb28e114d33c057d0389aec478bc6639e6ec53acf0bca831e5e52cc5de69|
2015-03-27 08:01:06|install|libtevent-util0|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|ba5daf1fa3a2516061400c8929d8874796817d393ee81d1c87a501acdaf2f66f|
2015-03-27 08:01:10|install|java-1_7_0-openjdk-headless|1.7.0.75-11.3|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|d05a72607256094412fad225d9bc5e3a5a6ea51bad82308d0d7dd1d7f1db1e32|
2015-03-27 08:01:10|install|libsamba-util0-32bit|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|4dee1415d250bbaea900eea27d62adea7f9857f4588b81b3973902ad8e67fbf2|
2015-03-27 08:01:10|install|libdcerpc-binding0|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|fa8a3424e5f41c01c1a467928f94864d2563c7c67859148cd804527d6fd02aa0|
2015-03-27 08:01:10|install|java-1_7_0-openjdk|1.7.0.75-11.3|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|920015412fbdf1fbf4524ee5476b730439cb03930b6853338a923ca08f393a4d|
2015-03-27 08:01:10|install|libndr0-32bit|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|c51e8db6413aaf25b81f36f6a8b32349d5f385d6574b3e1cb30a83be3db50b21|
2015-03-27 08:01:10|install|libndr-nbt0|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|f792c21d184fb7bfea2ceff1202ba10128355a037e8c299b43ac0de5a4c46288|
2015-03-27 08:01:10|install|libsamba-hostconfig0-32bit|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|795f7d9f89bb446c6002d6d19661f539fb7e80073fc4b8092b5a77bb97b1bf8e|
2015-03-27 08:01:10|install|libgensec0|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|0f05f89ce5f8bbeac8aee6b6277aa072d50603ee71de82f7d5221e2be4fa5eb6|
2015-03-27 08:01:10|install|libsamba-credentials0-32bit|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|57459b21cdab089c3cdfe0cdb50f71dab7b0d20dfa1a0f25740530815e2fb2f3|
2015-03-27 08:01:10|install|libsamba-credentials0|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|ca8f1b7e78adc4b579849b0a528bb27e4b49b6376b40db83f2d391a3d3c46e6d|
2015-03-27 08:01:10|install|libsamdb0-32bit|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|c880a11646f6eeffe28c090af2531277332ebea815d1a98bedba4f038e9e9c06|
2015-03-27 08:01:11|install|samba-libs|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|77ba32275bcdd1792fb04bf998e80fb0e10fa4836c8bbc0ea73a0c0be6cf99af|
2015-03-27 08:01:11|install|libgensec0-32bit|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|3250a7d3df96dd43d19c193ceeda9fceb9de56c1f0dc66bb06b0d71c41e715c6|
2015-03-27 08:01:11|install|libsamba-util0|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|527beec52de600ce323d3d398a98a2745b0f898707db46e1435fc363ada29064|
2015-03-27 08:01:11|install|libndr-nbt0-32bit|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|a0dcf7d690be633d608ffa7336c22a7417a13b4631836d6c6b0de8e1e0aac0c3|
2015-03-27 08:01:11|install|libndr0|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|3dbc0169aeb4df917b4cf635253c188e22e3591f8ecb4f290ee6b23b17edfcc1|
2015-03-27 08:01:11|install|libndr-standard0-32bit|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|3666b54f415d2ea351d3ceb51f8bb6ec0eec67932d66ce1fcca54d78dd708a51|
2015-03-27 08:01:11|install|libsamba-hostconfig0|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|137db912209bc64c74638220752c44b16899e96b1a7e8c2dcdcdcb67f462fd6b|
2015-03-27 08:01:11|install|libsmbclient-raw0-32bit|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|df3498fee5d3e81ee172274a129c88d4e69fbf8b2a68d3ec21669bf47488fe83|
2015-03-27 08:01:11|install|libndr-standard0|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|709524aa54bbd69a7bce67ab0895443c368da71da604201d136b5c412367a796|
2015-03-27 08:01:11|install|libdcerpc0-32bit|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|ee3153a14b23cd580e891b0a0e69bdb9fbcfd2a61659bcb3c61d66869f8a823b|
2015-03-27 08:01:11|install|libsmbconf0|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|4205e576a08796c9a08baed2679bf92952dc0e47e42c45a3f54cbf1ae721b75f|
2015-03-27 08:01:11|install|libndr-krb5pac0-32bit|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|206346e8a81b0548a4f9a8fb9f1b6b678c99de9b92fd19450ed5c4e6bb22269d|
2015-03-27 08:01:12|install|libsamdb0|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|55c9fc368d8ce40a71cf3f364f9cc063d271ea84f5dafa20f540721aefa9854f|
2015-03-27 08:01:12|install|libsmbconf0-32bit|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|4b018a82650da856658c96e54fe27f5b710564006f6393ff5de702ff51dabb22|
2015-03-27 08:01:12|install|libwbclient0|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|e02a3920fbb6b393d945c371d772a0c76be7f763a5501c05298e15197f29cd10|
2015-03-27 08:01:12|install|libwbclient0-32bit|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|616aaadd8b40264052eaca5aace015321083e21c7f3b2f7566eccae7f18f307e|
2015-03-27 08:01:12|install|libpdb0|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|be7121c0c94ade83ece04def2a642841d8e3cd8bab953d815c4c8809fcba67dc|
2015-03-27 08:01:12|install|libpdb0-32bit|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|566ac6b1bea269166a612fde0dd27cd763657b31aac5c67baaf497e282ccd50a|
2015-03-27 08:01:12|install|libsmbclient-raw0|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|232ea53e44606c712459da50ed3958d62eac882d294b7f8adbf42126b46ad4ac|
2015-03-27 08:01:12|install|libnetapi0-32bit|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|5ff5b2f2536d328539f4d6fade9d3bf6f65842b5cf006f6f213b2e95c28e4d79|
2015-03-27 08:01:12|install|libdcerpc0|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|cf63f31714cc9cc10ce79c16aa8f1b2b69f3417fde36e5c0991d5316a6813c1a|
2015-03-27 08:01:12|install|libsmbldap0-32bit|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|acc7708aaef16aa8ceb5c278be83c4ef35c8be1217049d9e68aeffec468b02ab|
2015-03-27 08:01:14|install|libndr-krb5pac0|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|33fe39b4f1d37dcc04fa5377275fbac5651a3e67c406c28b96a2e04d76fb3125|
2015-03-27 08:01:14|install|samba-32bit|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|d7d678b67d00d863d461d0bc63f21da36a8119532fd69826ae3d5ebb0cb6b780|
2015-03-27 08:01:14|install|libnetapi0|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|c61acad523a07e9c98dedbe2bf4f832c75e93d93b7346b2c78a50cb18c71edf5|
2015-03-27 08:01:14|install|samba-client-32bit|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|e75f129da027eea93a243b844092070b41a481a43bd28eb9b4c43ab780166a6d|
2015-03-27 08:01:14|install|libsmbldap0|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|cd272c6c11a5ec89f831e2c743940e2c202d495856e97b7fa3999f21a8d6c25e|
2015-03-27 08:01:14|install|libsmbclient0|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|6cebe0b952ebcc3c1d2baa9cb589e049df83bf8e754a4682d9f8ede8600ca273|
2015-03-27 08:01:14|install|libregistry0|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|973759476fc873073456f7a5380335704997962c6a875442c6b71536c06c0ad2|
# 2015-03-27 08:01:15 samba-client-4.1.12-16.1.x86_64.rpm installed ok
# Additional rpm output:
# Updating /etc/sysconfig/samba...
# Updating /etc/sysconfig/network/dhcp...
#
2015-03-27 08:01:15|install|samba-client|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|4f3fdc65b1096044c3b10fa5b349f0f9e0f2737697455ba268bdd87e7621dfcc|
# 2015-03-27 08:01:15 samba-4.1.12-16.1.x86_64.rpm installed ok
# Additional rpm output:
# Updating /etc/sysconfig/samba...
#
2015-03-27 08:01:15|install|samba|4.1.12-16.1|x86_64||SUSE_Linux_Enterprise_Server_12_x86_64:SLES12-Updates|7c5a29992d4aa0fc9c8539ef965b8f15512bfef3f55befaee6e0df6ab2cc6f17|
2015-03-27 08:01:15|install|libopenssl-devel|1.0.1i-20.1|x86_64||SUSE_Linux_Enterprise_Software_Development_Kit_12_x86_64:SLE-SDK12-Updates|08a04ba69d606ff2044b60c314f30cfe81c22dec3c22df729ace10eddcab16d8|
# 2015-03-27 08:01:38 Output of haveged-1.9.1-8.1.x86_64.rpm %posttrans script:
#     Creating initrd: /boot/initrd-3.12.28-4-default
#     Executing: /usr/bin/dracut --logfile /var/log/YaST2/mkinitrd.log --force /boot/initrd-3.12.28-4-default 3.12.28-4-default
#     *** Including module: bash ***
#     *** Including module: warpclock ***
#     *** Including module: i18n ***
#     *** Including module: ifcfg ***
#     *** Including module: drm ***
#     *** Including module: plymouth ***
#     *** Including module: btrfs ***
#     *** Including module: kernel-modules ***
#     *** Including module: resume ***
#     *** Including module: rootfs-block ***
#     *** Including module: terminfo ***
#     *** Including module: udev-rules ***
#     Skipping udev rule: 91-permissions.rules
#     Skipping udev rule: 80-drivers-modprobe.rules
#     *** Including module: biosdevname ***
#     *** Including module: haveged ***
#     *** Including module: systemd ***
#     *** Including module: usrmount ***
#     *** Including module: base ***
#     *** Including module: fs-lib ***
#     *** Including module: shutdown ***
#     *** Including module: suse ***
#     *** Including modules done ***
#     *** Installing kernel module dependencies and firmware ***
#     *** Installing kernel module dependencies and firmware done ***
#     *** Resolving executable dependencies ***
#     *** Resolving executable dependencies done***
#     *** Hardlinking files ***
#     *** Hardlinking files done ***
#     *** Stripping files ***
#     *** Stripping files done ***
#     *** Generating early-microcode cpio image ***
#     *** Constructing GenuineIntel.bin ****
#     *** Store current command line parameters ***
#     Stored kernel commandline:
#      resume=UUID=e3038aa2-0e37-421b-9baa-03354333b71e
#     root=UUID=3b514629-0205-443d-bb59-1f99f49f5745 rootflags=rw,relatime,space_cache rootfstype=btrfs
#     *** Creating image file ***
#     *** Creating image file done ***
#     Creating initrd: /boot/initrd-3.16.6-2-default
#     Executing: /usr/bin/dracut --logfile /var/log/YaST2/mkinitrd.log --force /boot/initrd-3.16.6-2-default 3.16.6-2-default
#     *** Including module: bash ***
#     *** Including module: warpclock ***
#     *** Including module: i18n ***
#     *** Including module: ifcfg ***
#     *** Including module: drm ***
#     *** Including module: plymouth ***
#     *** Including module: btrfs ***
#     *** Including module: kernel-modules ***
#     Omitting driver i2o_scsi
#     *** Including module: resume ***
#     *** Including module: rootfs-block ***
#     *** Including module: terminfo ***
#     *** Including module: udev-rules ***
#     Skipping udev rule: 91-permissions.rules
#     Skipping udev rule: 80-drivers-modprobe.rules
#     *** Including module: biosdevname ***
#     *** Including module: haveged ***
#     *** Including module: systemd ***
#     *** Including module: usrmount ***
#     *** Including module: base ***
#     *** Including module: fs-lib ***
#     *** Including module: shutdown ***
#     *** Including module: suse ***
#     *** Including modules done ***
#     *** Installing kernel module dependencies and firmware ***
#     *** Installing kernel module dependencies and firmware done ***
#     *** Resolving executable dependencies ***
#     *** Resolving executable dependencies done***
#     *** Hardlinking files ***
#     *** Hardlinking files done ***
#     *** Stripping files ***
#     *** Stripping files done ***
#     *** Generating early-microcode cpio image ***
#     *** Constructing GenuineIntel.bin ****
#     *** Store current command line parameters ***
#     Stored kernel commandline:
#      resume=UUID=e3038aa2-0e37-421b-9baa-03354333b71e
#     root=UUID=3b514629-0205-443d-bb59-1f99f49f5745 rootflags=rw,relatime,space_cache rootfstype=btrfs
#     *** Creating image file ***
#     *** Creating image file done ***
#     Update bootloader...

@mikewillis;27301

Did all the updates install successfully?

Yes.

@mikewillis;27301

Are there any outstanding updates?
Since X isn’t starting you can use zypper. If you don’t already know, this will show available updates

$ zypper refresh $ zypper lu

No, no outstanding updates.
zypper refresh tells me everything is up-to-date.

@mikewillis;27301

Do either of

$ pidof Xorg $ pidof gdm
Return a PID? From what you’ve said it sounds like they won’t.

gitadmin@tgit:~> pidof Xorg
3396
gitadmin@tgit:~> pidof gdm
3390

@mikewillis;27301

KDM isn’t included in SLES 12. I don’t have a SLES 12 install to hand right now but if the comments in /etc/sysconfig/displaymanager about values for DISPLAYMANAGER are the same as in SLED 12, which I suspect they are, they somewhat misleading. It’s not a list of values that are valid for SLES 12.

OK. Good to know.

@mikewillis;27301

If X is broken to the extent that it fails to start up boot I doubt anything is going to get written to any user’s .xsession-errors file. Does the time stamp on the file you’re looking at indicate that it’s been updated within a relevant time period?

X seems to be starting. I get the .xsession-errors files for every startup and every manual startx, but they do not contain anything else than:
I do not get the Xorg..log-file everytime though…

@mikewillis;27301

What’s the output of

$ lspci -nnk |  grep -A 3 VGA

06:00.0 VGA compatible controller [0300]: Matrox Electronics Systems Ltd. G200eR2 [102b:0534]
        Subsystem: Dell Device [1028:04f7]
        Kernel driver in use: mgag200
        Kernel modules: mgag200

@mikewillis;27301

Is there an /etc/X11/xorg.conf file?

No. Only an xorg.conf.install, which seems to be used in failsafe-mode.

@mikewillis;27301

What’s the output of

$ grep Driver /etc/X11/xorg.conf.d/*

xorg.conf.d/10-evdev.conf:        Driver "evdev"
xorg.conf.d/10-evdev.conf:        Driver "evdev"
xorg.conf.d/10-evdev.conf:        Driver "evdev"
xorg.conf.d/10-evdev.conf:        Driver "evdev"
xorg.conf.d/10-evdev.conf:        Driver "evdev"
xorg.conf.d/11-evdev.conf:        Driver  "evdev"
xorg.conf.d/50-device.conf:#  #Driver "radeon"
xorg.conf.d/50-synaptics.conf:        Driver "synaptics"
xorg.conf.d/50-synaptics.conf:        MatchDriver "synaptics"
xorg.conf.d/50-synaptics.conf:        MatchDriver "synaptics"
xorg.conf.d/50-vmmouse.conf:    Driver          "vmmouse"
xorg.conf.d/50-wacom.conf:      Driver "wacom"
xorg.conf.d/50-wacom.conf:      Driver "wacom"
xorg.conf.d/50-wacom.conf:        Driver "wacom"
xorg.conf.d/50-wacom.conf:      Driver "wacom"
xorg.conf.d/50-wacom.conf:      Driver "wacom"

@mikewillis;27301

Does the PID indicated there exist?

There is no matrox/mga indicated. Seems like the xorg-configuration for the mga is lost, right? How do I get it back? I tried to reinstall the driver, but that didn’t help. Or maybe I did it the wrong way?

[QUOTE=mikewillis;27301]
When posting contents of log files and such, wrap it in CODE tags, it helps a lot with readability and prevents the forum software potentially turning bits of it in to smiley faces and such. Look for the # button on the toolbar when composing.[/QUOTE]

I hope this is more readable now.

Thank you very much for your help!
/Mattias

[mikewillis]

Well X is actually running so seems like just it’s configuration is messed up/wrong.

You could try copying /etc/X11/xorg.conf.install to /etc/X11/xorg.conf and see if that at least makes GDM visible.

You could also

$ systemctl stop display-manager $ Xorg -configure
Then copy the resulting file to /etc/X11/xorg.conf

[xjom71]

[QUOTE=mikewillis;27335]Well X is actually running so seems like just it’s configuration is messed up/wrong.

You could try copying /etc/X11/xorg.conf.install to /etc/X11/xorg.conf and see if that at least makes GDM visible.
[/QUOTE]

No luck.

[QUOTE=mikewillis;27335]You could also

$ systemctl stop display-manager $ Xorg -configure
Then copy the resulting file to /etc/X11/xorg.conf[/QUOTE]

That went bad, too:

gitadmin@tgit:~> sudo Xorg -configure

X.Org X Server 1.15.2
Release Date: 2014-06-27
X Protocol Version 11, Revision 0
Build Operating System: openSUSE SUSE LINUX
Current Operating System: Linux tgit 3.16.6-2-default #1 SMP Mon Oct 20 13:47:22 UTC 2014 (feb42ea) x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.6-2-default root=UUID=3b514629-0205-443d-bb59-1f99f49f5745 resume=/dev/sda1 splash=silent quiet crashkernel=224M-:112M showopts
Build Date: 10 February 2015  08:43:16AM

Current version of pixman: 0.32.6
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Apr 10 20:25:21 2015
List of video drivers:
        fbdev
        modesetting
        mga
        vesa
(++) Using config file: "/root/xorg.conf.new"
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"


Xorg detected your mouse at device /dev/input/mice.
Please check your config if the mouse is still not
operational, as by default Xorg tries to autodetect
the protocol.

Your xorg.conf file is /root/xorg.conf.new

To test the server, run 'X -config /root/xorg.conf.new'

VGA Arbitration: Cannot restore default device.
(EE) Server terminated with error (2). Closing log file.

Then it says in the Xorg.0.log:

[   414.701]
X.Org X Server 1.15.2
Release Date: 2014-06-27
[   414.701] X Protocol Version 11, Revision 0
[   414.701] Build Operating System: openSUSE SUSE LINUX
[   414.701] Current Operating System: Linux tgit 3.16.6-2-default #1 SMP Mon Oct 20 13:47:22 UTC
 2014 (feb42ea) x86_64
[   414.701] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.6-2-default root=UUID=3b514629-02
05-443d-bb59-1f99f49f5745 resume=/dev/sda1 splash=silent quiet crashkernel=224M-:112M showopts
[   414.701] Build Date: 10 February 2015  08:43:16AM
[   414.701]
[   414.701] Current version of pixman: 0.32.6
[   414.701]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[   414.701] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   414.702] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Apr 10 20:29:55 2015
[   414.702] (++) Using config file: "/root/xorg.conf.new"
[   414.702] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   414.702] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   414.703] (==) ServerLayout "X.org Configured"
[   414.703] (**) |-->Screen "Screen0" (0)
[   414.703] (**) |   |-->Monitor "Monitor0"
[   414.703] (**) |   |-->Device "Card0"
[   414.703] (**) |-->Input Device "Mouse0"
[   414.703] (**) |-->Input Device "Keyboard0"
[   414.703] (==) Automatically adding devices
[   414.703] (==) Automatically enabling devices
[   414.703] (==) Automatically adding GPU devices
[   414.703] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[   414.703]    Entry deleted from font path.
[   414.703] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[   414.703]    Entry deleted from font path.
[   414.703] (**) FontPath set to:
        /usr/share/fonts/misc:unscaled,
        /usr/share/fonts/Type1/,
        /usr/share/fonts/100dpi:unscaled,
        /usr/share/fonts/75dpi:unscaled,
        /usr/share/fonts/ghostscript/,
        /usr/share/fonts/cyrillic:unscaled,
        /usr/share/fonts/truetype/,
        built-ins,
        /usr/share/fonts/misc:unscaled,
        /usr/share/fonts/Type1/,
        /usr/share/fonts/100dpi:unscaled,
        /usr/share/fonts/75dpi:unscaled,
        /usr/share/fonts/ghostscript/,
        /usr/share/fonts/cyrillic:unscaled,
        /usr/share/fonts/truetype/,
        built-ins
[   414.703] (**) ModulePath set to "/usr/lib64/xorg/modules"
[   414.703] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be di
sabled.
[   414.703] (WW) Disabling Mouse0
[   414.703] (WW) Disabling Keyboard0
[   414.703] (II) Loader magic: 0x603b60
[   414.703] (II) Module ABI versions:
[   414.703]    X.Org ANSI C Emulation: 0.4
[   414.703]    X.Org Video Driver: 15.0
[   414.703]    X.Org XInput driver : 20.0
[   414.703]    X.Org Server Extension : 8.0
[   414.703] (II) xfree86: Adding drm device (/dev/dri/card0)
[   414.716] (--) PCI:*(0:6:0:0) 102b:0534:1028:04f7 rev 0, Mem @ 0xd8000000/16777216, 0xde7fc000
/16384, 0xdd800000/8388608
[   414.716] Initializing built-in extension Generic Event Extension
[   414.716] Initializing built-in extension SHAPE
[   414.716] Initializing built-in extension MIT-SHM
[   414.716] Initializing built-in extension XInputExtension
[   414.716] Initializing built-in extension XTEST
[   414.716] Initializing built-in extension BIG-REQUESTS
[   414.716] Initializing built-in extension SYNC
[   414.716] Initializing built-in extension XKEYBOARD
[   414.716] Initializing built-in extension XC-MISC
[   414.716] Initializing built-in extension SECURITY
[   414.716] Initializing built-in extension XINERAMA
[   414.716] Initializing built-in extension XFIXES
[   414.716] Initializing built-in extension RENDER
[   414.716] Initializing built-in extension RANDR
[   414.716] Initializing built-in extension COMPOSITE
[   414.716] Initializing built-in extension DAMAGE
[   414.716] Initializing built-in extension MIT-SCREEN-SAVER
[   414.716] Initializing built-in extension DOUBLE-BUFFER
[   414.716] Initializing built-in extension RECORD
[   414.716] Initializing built-in extension DPMS
[   414.716] Initializing built-in extension Present
[   414.716] Initializing built-in extension DRI3
[   414.716] Initializing built-in extension X-Resource
[   414.716] Initializing built-in extension XVideo
[   414.716] Initializing built-in extension XVideo-MotionCompensation
[   414.716] Initializing built-in extension XFree86-VidModeExtension
[   414.716] Initializing built-in extension XFree86-DGA
[   414.716] Initializing built-in extension DRI2
[   414.716] (II) "glx" will be loaded. This was enabled by default and also specified in the con
fig file.
[   414.716] (II) LoadModule: "vnc"
[   414.716] (II) Loading /usr/lib64/xorg/modules/extensions/libvnc.so
[   414.854] (II) Module vnc: vendor="Constantin Kaplinsky"
[   414.854]    compiled for 1.14.0, module version = 1.0.0
[   414.854]    Module class: X.Org Server Extension
[   414.854]    ABI class: X.Org Server Extension, version 7.0
[   414.854] (EE) module ABI major version (7) doesn't match the server's version (8)
[   414.854] (II) UnloadModule: "vnc"
[   414.854] (II) Unloading vnc
[   414.854] (EE) Failed to load module "vnc" (module requirement mismatch, 0)
[   414.854] (II) LoadModule: "glx"
[   414.855] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[   414.856] (II) Module glx: vendor="X.Org Foundation"
[   414.856]    compiled for 1.15.2, module version = 1.0.0
[   414.856]    ABI class: X.Org Server Extension, version 8.0
[   414.856] (==) AIGLX enabled
[   414.856] Loading extension GLX
[   414.856] (II) LoadModule: "fbdev"
[   414.856] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[   414.856] (II) Module fbdev: vendor="X.Org Foundation"
[   414.856]    compiled for 1.15.2, module version = 0.4.4
[   414.856]    Module class: X.Org Video Driver
[   414.856]    ABI class: X.Org Video Driver, version 15.0
[   414.856] (II) FBDEV: driver for framebuffer: fbdev
[   414.857] (--) using VT number 2

[   414.892] (II) Loading sub module "fbdevhw"
[   414.892] (II) LoadModule: "fbdevhw"
[   414.892] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[   414.892] (II) Module fbdevhw: vendor="X.Org Foundation"
[   414.892]    compiled for 1.15.2, module version = 0.0.2
[   414.892]    ABI class: X.Org Video Driver, version 15.0
[   414.892] (**) FBDEV(0): claimed PCI slot 6@0:0:0
[   414.892] (II) FBDEV(0): using default device
[   414.892] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[   414.892] (==) FBDEV(0): RGB weight 888
[   414.892] (==) FBDEV(0): Default visual is TrueColor
[   414.892] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[   414.892] (II) FBDEV(0): hardware: mgadrmfb (video memory: 0kB)
[   414.892] (II) FBDEV(0): checking modes against framebuffer device...
[   414.892] (II) FBDEV(0): checking modes against monitor...
[   414.892] (--) FBDEV(0): Virtual size is 1280x1024 (pitch 1280)
[   414.892] (**) FBDEV(0):  Built-in mode "current"
[   414.892] (==) FBDEV(0): DPI set to (96, 96)
[   414.892] (II) Loading sub module "fb"
[   414.892] (II) LoadModule: "fb"
[   414.892] (II) Loading /usr/lib64/xorg/modules/libfb.so
[   414.893] (II) Module fb: vendor="X.Org Foundation"
[   414.893]    compiled for 1.15.2, module version = 1.0.0
[   414.893]    ABI class: X.Org ANSI C Emulation, version 0.4
[   414.893] (**) FBDEV(0): using shadow framebuffer
[   414.893] (II) Loading sub module "shadow"
[   414.893] (II) LoadModule: "shadow"
[   414.893] (II) Loading /usr/lib64/xorg/modules/libshadow.so
[   414.893] (II) Module shadow: vendor="X.Org Foundation"
[   414.893]    compiled for 1.15.2, module version = 1.1.0
[   414.893]    ABI class: X.Org ANSI C Emulation, version 0.4
[   414.893] (==) Depth 24 pixmap format is 32 bpp
[   414.893] (EE) FBDEV(0): mmap fbmem: Invalid argument
[   414.893] (EE) FBDEV(0): mapping of video memory failed
[   414.893] (EE)
Fatal server error:
[   414.893] (EE) AddScreen/ScreenInit failed for driver 0
[   414.893] (EE)
[   414.893] (EE)
Please consult the The X.Org Foundation support
         at http://wiki.x.org
 for help.
[   414.893] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional informat
ion.
[   414.893] (EE)
[   414.961] (EE) Server terminated with error (1). Closing log file.

And if I run the test ‘X -config /root/xorg.conf.new’, despite the errors, I get:

X.Org X Server 1.15.2
Release Date: 2014-06-27
X Protocol Version 11, Revision 0
Build Operating System: openSUSE SUSE LINUX
Current Operating System: Linux tgit 3.16.6-2-default #1 SMP Mon Oct 20 13:47:22                  UTC 2014 (feb42ea) x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.6-2-default root=UUID=3b51462                 9-0205-443d-bb59-1f99f49f5745 resume=/dev/sda1 splash=silent quiet crashkernel=2                 24M-:112M showopts
Build Date: 10 February 2015  08:43:16AM

Current version of pixman: 0.32.6
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Apr 10 20:29:55 2015
(++) Using config file: "/root/xorg.conf.new"
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension Present
Initializing built-in extension DRI3
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension DRI2
(EE) module ABI major version (7) doesn't match the server's version (8)
Loading extension GLX
(EE)
Fatal server error:
(EE) AddScreen/ScreenInit failed for driver 0
(EE)
(EE)
Please consult the The X.Org Foundation support
         at http://wiki.x.org
 for help.
(EE) Please also check the log file at "/var/log/Xorg.0.log" for additional info                 rmation.
(EE)
(EE) Server terminated with error (1). Closing log file.

This is what the xorg.conf.new contained:

Section "ServerLayout"
        Identifier     "X.org Configured"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
        ModulePath   "/usr/lib64/xorg/modules"
        FontPath     "/usr/share/fonts/misc:unscaled"
        FontPath     "/usr/share/fonts/Type1/"
        FontPath     "/usr/share/fonts/100dpi:unscaled"
        FontPath     "/usr/share/fonts/75dpi:unscaled"
        FontPath     "/usr/share/fonts/ghostscript/"
        FontPath     "/usr/share/fonts/cyrillic:unscaled"
        FontPath     "/usr/share/fonts/misc/sgi:unscaled"
        FontPath     "/usr/share/fonts/truetype/"
        FontPath     "built-ins"
EndSection

Section "Module"
        Load  "vnc"
        Load  "glx"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "auto"
        Option      "Device" "/dev/input/mice"
        Option      "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "ShadowFB"                  # [<bool>]
        #Option     "Rotate"                    # <str>
        #Option     "fbdev"                     # <str>
        #Option     "debug"                     # [<bool>]
        Identifier  "Card0"
        Driver      "fbdev"
        BusID       "PCI:6:0:0"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Card0"
        Monitor    "Monitor0"
        SubSection "Display"
                Viewport   0 0
                Depth     1
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     4
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     8
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     15
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     16
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     24
        EndSubSection
EndSection

Rebooting using that one resulted in an earlier startup crash, returning to the terminal login, after just 16 rolling SUSE-dots… But, you might have guessed that already.

I will see if DELL can help me restore the xorg.conf for me.

Thanks for you help and time!

BR
/Mattias

[xjom71]

Slowly, I have started to re-create the xorg.conf, because I was too late for DELL support for this weekend (I’ll call them on Monday, but I really can’t restart this server when people are here working…)

This is what I have come up with:

Section "ServerLayout"
        Identifier     "X.org Configured"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
        ModulePath   "/usr/lib64/xorg/modules"
        FontPath     "/usr/share/fonts/misc:unscaled"
        FontPath     "/usr/share/fonts/Type1/"
        FontPath     "/usr/share/fonts/100dpi:unscaled"
        FontPath     "/usr/share/fonts/75dpi:unscaled"
        FontPath     "/usr/share/fonts/ghostscript/"
        FontPath     "/usr/share/fonts/cyrillic:unscaled"
        FontPath     "/usr/share/fonts/misc/sgi:unscaled"
        FontPath     "/usr/share/fonts/truetype/"
        FontPath     "built-ins"
EndSection

Section "Module"
        Load  "fbdevhw"
        Load  "glx"
        Load  "freetype"
        Load  "type1"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "auto"
        Option      "Device" "/dev/input/mice"
        Option      "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Dell"
        ModelName    "Dell 1905FP (Digital)"
        HorizSync 30.0 - 81.0
        VertRefresh 56.0 - 76.0
        Option "dpms"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "ShadowFB"                  # [<bool>]
        #Option     "Rotate"                    # <str>
        #Option     "fbdev"                     # <str>
        #Option     "debug"                     # [<bool>]
        Identifier  "Card0"
        Driver      "mga"
        VideoRam        16384
        BusID       "PCI:6:0:0"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Card0"
        Monitor    "Monitor0"
        DefaultDepth 24
        SubSection "Display"
                Viewport   0 0
                Depth     16
                Modes "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     24
                Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "64
0x480"
        EndSubSection
EndSection

Section "ServerFlags"
        Option  "IgnoreABI"     "TRUE"
EndSection

But, still, I get this very annoying result in Xorg.0.log:

[  2627.816]
X.Org X Server 1.15.2
Release Date: 2014-06-27
[  2627.838] X Protocol Version 11, Revision 0
[  2627.846] Build Operating System: openSUSE SUSE LINUX
[  2627.854] Current Operating System: Linux tgit 3.16.6-2-default #1 SMP Mon Oc
t 20 13:47:22 UTC 2014 (feb42ea) x86_64
[  2627.854] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.6-2-default root
=UUID=3b514629-0205-443d-bb59-1f99f49f5745 resume=/dev/sda1 splash=silent quiet
crashkernel=224M-:112M showopts
[  2627.880] Build Date: 10 February 2015  08:43:16AM
[  2627.889]
[  2627.898] Current version of pixman: 0.32.6
[  2627.916]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[  2627.916] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  2627.953] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Apr 10 22:34:26 201
5
[  2627.963] (==) Using config file: "/etc/X11/xorg.conf"
[  2627.972] (==) Using config directory: "/etc/X11/xorg.conf.d"
[  2627.982] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  2627.982] (==) ServerLayout "X.org Configured"
[  2627.982] (**) |-->Screen "Screen0" (0)
[  2627.982] (**) |   |-->Monitor "Monitor0"
[  2627.982] (**) |   |-->Device "Card0"
[  2627.982] (**) |-->Input Device "Mouse0"
[  2627.982] (**) |-->Input Device "Keyboard0"
[  2627.982] (**) Option "IgnoreABI" "TRUE"
[  2627.982] (**) Ignoring ABI Version
[  2627.982] (==) Automatically adding devices
[  2627.982] (==) Automatically enabling devices
[  2627.982] (==) Automatically adding GPU devices
[  2627.982] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[  2627.982]    Entry deleted from font path.
[  2627.982] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[  2627.982]    Entry deleted from font path.
[  2627.982] (**) FontPath set to:
        /usr/share/fonts/misc:unscaled,
        /usr/share/fonts/Type1/,
        /usr/share/fonts/100dpi:unscaled,
        /usr/share/fonts/75dpi:unscaled,
        /usr/share/fonts/ghostscript/,
        /usr/share/fonts/cyrillic:unscaled,
        /usr/share/fonts/truetype/,
        built-ins,
        /usr/share/fonts/misc:unscaled,
        /usr/share/fonts/Type1/,
        /usr/share/fonts/100dpi:unscaled,
        /usr/share/fonts/75dpi:unscaled,
        /usr/share/fonts/ghostscript/,
        /usr/share/fonts/cyrillic:unscaled,
        /usr/share/fonts/truetype/,
        built-ins
[  2627.982] (**) ModulePath set to "/usr/lib64/xorg/modules"
[  2627.982] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vm
mouse' will be disabled.
[  2627.982] (WW) Disabling Mouse0
[  2627.982] (WW) Disabling Keyboard0
[  2627.982] (II) Loader magic: 0x603b60
[  2627.982] (II) Module ABI versions:
[  2627.982]    X.Org ANSI C Emulation: 0.4
[  2627.982]    X.Org Video Driver: 15.0
[  2627.982]    X.Org XInput driver : 20.0
[  2627.982]    X.Org Server Extension : 8.0
[  2627.982] (II) xfree86: Adding drm device (/dev/dri/card0)
[  2627.993] (--) PCI:*(0:6:0:0) 102b:0534:1028:04f7 rev 0, Mem @ 0xd8000000/167
77216, 0xde7fc000/16384, 0xdd800000/8388608
[  2628.003] Initializing built-in extension Generic Event Extension
[  2628.012] Initializing built-in extension SHAPE
[  2628.021] Initializing built-in extension MIT-SHM
[  2628.031] Initializing built-in extension XInputExtension
[  2628.040] Initializing built-in extension XTEST
[  2628.049] Initializing built-in extension BIG-REQUESTS
[  2628.058] Initializing built-in extension SYNC
[  2628.067] Initializing built-in extension XKEYBOARD
[  2628.075] Initializing built-in extension XC-MISC
[  2628.084] Initializing built-in extension SECURITY
[  2628.093] Initializing built-in extension XINERAMA
[  2628.101] Initializing built-in extension XFIXES
[  2628.109] Initializing built-in extension RENDER
[  2628.118] Initializing built-in extension RANDR
[  2628.126] Initializing built-in extension COMPOSITE
[  2628.134] Initializing built-in extension DAMAGE
[  2628.142] Initializing built-in extension MIT-SCREEN-SAVER
[  2628.150] Initializing built-in extension DOUBLE-BUFFER
[  2628.158] Initializing built-in extension RECORD
[  2628.166] Initializing built-in extension DPMS
[  2628.173] Initializing built-in extension Present
[  2628.181] Initializing built-in extension DRI3
[  2628.188] Initializing built-in extension X-Resource
[  2628.195] Initializing built-in extension XVideo
[  2628.203] Initializing built-in extension XVideo-MotionCompensation
[  2628.210] Initializing built-in extension XFree86-VidModeExtension
[  2628.217] Initializing built-in extension XFree86-DGA
[  2628.223] Initializing built-in extension DRI2
[  2628.223] (II) "glx" will be loaded. This was enabled by default and also spe
cified in the config file.
[  2628.223] (II) LoadModule: "fbdevhw"
[  2628.224] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[  2628.224] (II) Module fbdevhw: vendor="X.Org Foundation"
[  2628.224]    compiled for 1.15.2, module version = 0.0.2
[  2628.224]    ABI class: X.Org Video Driver, version 15.0
[  2628.224] (II) LoadModule: "glx"
[  2628.224] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[  2628.224] (II) Module glx: vendor="X.Org Foundation"
[  2628.224]    compiled for 1.15.2, module version = 1.0.0
[  2628.224]    ABI class: X.Org Server Extension, version 8.0
[  2628.224] (==) AIGLX enabled
[  2628.231] Loading extension GLX
[  2628.231] (II) LoadModule: "mga"
[  2628.231] (II) Loading /usr/lib64/xorg/modules/drivers/mga_drv.so
[  2628.231] (II) Module mga: vendor="X.Org Foundation"
[  2628.231]    compiled for 1.15.2, module version = 1.6.3
[  2628.231]    Module class: X.Org Video Driver
[  2628.231]    ABI class: X.Org Video Driver, version 15.0
[  2628.231] (II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w
,
        mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI,
        mgag200 SE A PCI, mgag200 SE B PCI, mgag200 EV Maxim,
        mgag200 ER SH7757, mgag200 eW Nuvoton, mgag200eH, mgag400, mgag550
[  2628.231] (--) using VT number 2

[  2628.264] (EE) mga: The PCI device 0x534 at 06@00:00:0 has a kernel module cl
aiming it.
[  2628.264] (EE) mga: This driver cannot operate until it has been unloaded.
[  2628.264] (EE) No devices detected.
[  2628.264] (EE)
Fatal server error:
[  2628.264] (EE) no screens found(EE)
[  2628.264] (EE)
Please consult the The X.Org Foundation support
         at http://wiki.x.org
 for help.
[  2628.264] (EE) Please also check the log file at "/var/log/Xorg.0.log" for ad
ditional information.
[  2628.264] (EE)

Right now, I am both out of luck and ideas, and seem to be back where I started, with

The PCI device 0x534 at 06@00:00:0 has a kernel module claiming it. This driver cannot operate until it has been unloaded.

BR
/Mattias