SLES 11 SP and diskarray HP 3PAR 7200C over HBA adapter

SUSE Product Topics SLES Hardware
1

Good morning,
we plan to migrate our server from HP EVA diskaarray to HP3PAR, how is it supported ? Server is HP DL380G7. We must update firmware of the server and HBA, are there any issues fo SLES 11 SP3 ? Will it starts OK ? Are there drivers for this array ?
Thanks and best regards
J.Karliak

2

[QUOTE=josefkarliak;29045]Good morning,
we plan to migrate our server from HP EVA diskaarray to HP3PAR, how is it supported ? Server is HP DL380G7. We must update firmware of the server and HBA, are there any issues fo SLES 11 SP3 ? Will it starts OK ? Are there drivers for this array ?
Thanks and best regards
J.Karliak[/QUOTE]

You should probably ask HP but I believe it will work fine. You didn’t mention which HBA’s you are using but I found this document which stats that both Qlogic and Emulex works: http://webcache.googleusercontent.com/search?q=cache:AR7bUKDCAucJ:h20565.www2.hp.com/hpsc/doc/public/display%3Fsp4ts.oid%3D5383451%26docId%3Demr_na-c02663748%26docLocale%3Den_US+&cd=1&hl=en&ct=clnk&gl=se

Thomas

3

Hi,
thanks for the answer, I forgot to write a HBA chip - it is Emulex:

hwinfo | grep Emulex
info.vendor = ‘Emulex Corporation’
pci.subsys_vendor = ‘Emulex Corporation’
pci.vendor = ‘Emulex Corporation’
info.vendor = ‘Emulex Corporation’
pci.subsys_vendor = ‘Emulex Corporation’
pci.vendor = ‘Emulex Corporation’
<4>Emulex LightPulse Fibre Channel SCSI driver 8.3.7.10.7p
<4>Copyright(c) 2004-2011 Emulex. All rights reserved.
<6>scsi1 : Emulex LPe1150 PCIe Fibre Channel Adapter on PCI bus 0b device 00 irq 31
<6>scsi2 : Emulex LPe1150 PCIe Fibre Channel Adapter on PCI bus 0e device 00 irq 30
Model: “Emulex Zephyr LightPulse Fibre Channel Host Adapter”
Vendor: pci 0x10df “Emulex Corporation”
SubVendor: pci 0x10df “Emulex Corporation”
Model: “Emulex Zephyr LightPulse Fibre Channel Host Adapter”
Vendor: pci 0x10df “Emulex Corporation”
SubVendor: pci 0x10df “Emulex Corporation”

Thanks.
J.Karliak.

4

[QUOTE=josefkarliak;29048]Hi,
thanks for the answer, I forgot to write a HBA chip - it is Emulex:

hwinfo | grep Emulex
info.vendor = ‘Emulex Corporation’
pci.subsys_vendor = ‘Emulex Corporation’
pci.vendor = ‘Emulex Corporation’
info.vendor = ‘Emulex Corporation’
pci.subsys_vendor = ‘Emulex Corporation’
pci.vendor = ‘Emulex Corporation’
<4>Emulex LightPulse Fibre Channel SCSI driver 8.3.7.10.7p
<4>Copyright(c) 2004-2011 Emulex. All rights reserved.
<6>scsi1 : Emulex LPe1150 PCIe Fibre Channel Adapter on PCI bus 0b device 00 irq 31
<6>scsi2 : Emulex LPe1150 PCIe Fibre Channel Adapter on PCI bus 0e device 00 irq 30
Model: “Emulex Zephyr LightPulse Fibre Channel Host Adapter”
Vendor: pci 0x10df “Emulex Corporation”
SubVendor: pci 0x10df “Emulex Corporation”
Model: “Emulex Zephyr LightPulse Fibre Channel Host Adapter”
Vendor: pci 0x10df “Emulex Corporation”
SubVendor: pci 0x10df “Emulex Corporation”

Thanks.
J.Karliak.[/QUOTE]

There seems to be drivers for it: https://drivers.suse.com/driver-process/pub/update/Emulex/sle11sp3/common/

Thomas